home *** CD-ROM | disk | FTP | other *** search
- Subject: v24i107: psroff, Troff to PostScript filter, Part12/19
- Newsgroups: comp.sources.unix
- Approved: rsalz@uunet.UU.NET
-
- Submitted-by: Chris Lewis <clewis@ferret.ocunix.on.ca>
- Posting-number: Volume 24, Issue 107
- Archive-name: psroff3.o/part12
-
- #! /bin/sh
- # This is a shell archive. Remove anything before this line, then feed it
- # into a shell via "sh file" or similar. To overwrite existing files,
- # type "sh file -c".
- # The tool that generated this appeared in the comp.sources.unix newsgroup;
- # send mail to comp-sources-unix@uunet.uu.net if you want that tool.
- # Contents: LASERFONTS fonts.lj/S.11.pk.UU fonts.lj/S.14.pk.UU
- # man/cat.5.S utils/dumpft.c utils/fonts/cmbx10.pk.UU
- # utils/fonts/cmr10.pk.UU
- # Wrapped by clewis@ecicrl on Fri Apr 5 20:56:02 1991
- PATH=/bin:/usr/bin:/usr/ucb ; export PATH
- echo If this archive is complete, you will see the following message:
- echo ' "shar: End of archive 12 (of 19)."'
- if test -f 'LASERFONTS' -a "${1}" != "-c" ; then
- echo shar: Will not clobber existing file \"'LASERFONTS'\"
- else
- echo shar: Extracting \"'LASERFONTS'\" \(7816 characters\)
- sed "s/^X//" >'LASERFONTS' <<'END_OF_FILE'
- X How to build Fonts and Width Tables for your Laserjet
- X 2.3 91/04/02
- X
- XThis readme presents a general discussion on how to build fonts
- Xfor psroff. The first part gives a complete description of what
- Xneeds to be done/how it's done, and you can skip to the second
- Xpart "AUTOMATING THE WHOLE DURN THING" if you want to use my facilities
- Xfor doing all this stuff without really needing to understand what's
- Xhappening. This document does NOT directly apply to use with a Laserjet
- XIII, because the built-in fonts are used.
- X
- XPsroff has been designed to work with HP SFP or TeX PK format files.
- XMost fonts are called "normal" (Eg: R, I, B, etc.) which means that
- Xthey have ROMAN8 encodings. Thus, HP SFP ROMAN8 SFP fonts can be
- Xused as-is for psroff normal fonts (aside from copying them from
- Xfloppy, giving them the right names, building width tables).
- XOn the other hand, the troff "S" font is a special font that I
- Xsupply which has (nominally) MATH8 encodings.
- X
- XIf you can obtain HP fonts, either as soft fonts on floppy or the
- XLaserjet III scalable fonts plus PC program to scale them to given
- Xsize, you just generate the fonts you want at the CAT troff sizes
- Xand then copy them to FONTDIR/lib/lj, fix lj.fonts and do a
- X"make register" and "make installwidths"
- X
- XKnuth's TeX PK fonts cannot be used "out-of-the-box" because the
- Xcharacter encodings are different, and the characters that psroff
- Xneeds are scattered across many different fonts.
- X
- XDo not despair, all is not lost - you can run psroff *purely* with
- XTeX fonts, with the help of a little pk2* magic. The supplied
- XS font is an example of the result of this, and the S fonts contain
- Xa few characters you'll need if you wish to build your own fonts.
- X
- XIn the subdirectory utils, there are several important tools:
- X
- X 1) pk2sfp - which converts PK's and SFP's into SFP's,
- X merging multiple ones and possibly with encoding changes.
- X 2) pk2ditwid - which reads a font file and generates
- X font width information.
- X 3) maps/* - encoding files for converting from PK encoding
- X to ROMAN8/MATH8 encodings.
- X 4) fonts/* - sample fonts.
- X
- X(The following discussion assumes that you've built and installed
- Xpsroff).
- X
- XFirst, examine utils/Makefile entry "buildcmtrf". If you run this,
- Xthe Makefile will create several cmtrf*.sfp files under the fonts
- Xsubdirectory. These cmtrf files are a subset of Rick Richardson's
- X"cmtrf" font which contains characters not in TeX's PK files that you
- Xwill need to build fonts for psroff. Rick has graciously permitted
- Xdistribution of the cmtrf font with psroff, and I've placed the characters
- Xin the distributed S font. Buildcmtrf uses the "-m" option of pk2sfp
- X(see the manual page) to extract characters named in maps/S.cmtrf
- X("S-font-to-CMTRF") and produce cmtrf<pointsize>.sfp files.
- X
- XNext, examine utils/Makefile entry "testmerge". What this does is
- Xrun "pk2sfp -m" to generate several different fonts at the 10 point
- Xsize. "testmerge" also invokes sfp2pk (if you have it - it comes
- Xwith Rick's jetroff package) to convert the resultant SFP to PK format.
- XEach font created by testmerge is a combination of several different
- XPK fonts. The invocations of "pk2sfp -m" consist of something like:
- X
- X pk2sfp -m <mapfile> <fontfile> <mapfile> <fontfile>....
- X
- XWhere each map file contains a description of what character in the
- Xfollowing fontfile is needed and what encoding should be used. The
- Xnaming convention of these map files is:
- X
- X <from>.<to>
- X
- XWhere "from" is usually a PK font name (eg: "cmtrf") and "to" is usually
- Xeither ROMAN8 (for normal fonts) or MATH8 (for symbol fonts).
- X
- XThis is how the 10 point R font was built:
- X ./pk2sfp -m -v \
- X maps/cmr.ROMAN8 \
- X fonts/cmr10.pk \
- X maps/cmsy.ROMAN8 \
- X fonts/cmsy10.pk \
- X maps/cmtrf.ROMAN8 \
- X fonts/cmtrf10.sfp \
- X maps/cmti.ROMAN8 \
- X fonts/cmti10.pk \
- X > fonts/R.10.sfp 2> fonts/R.10.LOG
- X
- XA combination of cmr, cmsy, cmtrf, cmti.
- X
- XNOTE: psroff will work equally well with SFP's and PK's. There is
- Xa substantial space advantage to converting SFP's to PK's (if you have
- Xsfp2pk), but it is *not* necessary. Further, you can always compress
- Xyour SFP's in place, and psroff will automatically invoke compress
- Xwhen it needs to read them. It's only important that you get the
- Xnaming convention correct (<troffname>.<pointsize>.<pk|sfp>) and
- Xthe lj.fonts file set correctly.
- X
- XSo, the testmerge entry of the utils/Makefile creates R, I, B, C, S,
- XH, etc fonts at 10 points. Only 10 points. You could operate
- Xwith these only - but you'd only have one size. Yuck. (I distribute
- XR, I, and B only at 10 points so that you can see that psroff actually
- Xworks and not get discouraged before trying to obtain more fonts).
- X
- XThis is where it gets interesting. TeX fonts usually come (as in the
- XU of T distribution) in the following naming format:
- X
- X <TeX Name><designsize>.<resolution>pk
- X
- XEg: cmr10.329pk. What this means that if the characters were printed
- Xon a device with a resolution of 329 dots/inch, the characters would
- Xbe 10 points high. However, the Laserjet is 300 DPI, right? If you
- Xwere to print the font at 300 DPI, the characters would appear to
- Xbe (329/300 * 10) points = 10.996... points (11 with a small error),
- Xwouldn't they? Thus, you could use cmr10.329pk to generate a 11 point
- Xfont.
- X
- X[NOTE: if the resolution is omitted, it is assumed to be 300 DPI -
- Xas in the utils/fonts subdirectory]
- X
- XBy finding cmti and cmsy (cmtrf11.sfp was built by buildcmtrf
- Xremember?) in the same fashion where the design size and DPI are *close*
- Xto 11, you can build the R font at 11 points simply by substituting
- Xthe "fonts/*" names in the pk2sfp -m command line with the appropriate
- Xfont names (the map files don't change). Thus, you can build R, I, B
- Xin several different point sizes. Note: sometimes you can't find
- Xa TeX font with a DPI/pointsize close enough to the desired point size.
- XThe S fonts were built with a maximum error of approximately 7%.
- X
- XAUTOMATING THE WHOLE DURN THING:
- X
- XThere is a perl script in utils called "calcfonts", which if invoked
- Xin the top level make via:
- X
- X make buildljfonts
- X
- XWill traverse every directory you've specified for PKFONTS during
- Xconfiguration of the top-level-makefile, select the best fit for
- Xeach font size, and build as many psroff font files as it can, placing
- Xeach font in $NEWFONTS. Preferably you should have a sfp2pk utility
- X(so that the fonts can be created as pk's - specify in the Makefile),
- Xbut if you don't SFP's will be generated. $NEWFONTS/lj.fonts.new
- Xwill contain some new replacement entries for your lj.fonts file (make
- Xsure that the order is R, I, B and S).
- X
- XAfter running buildljfonts, issue:
- X
- X su root
- X make installljfonts
- X ^D
- X make register
- X su root
- X make installwidths
- X
- XThe first make will install all of the new laserjet fonts in utils/newfonts.
- XThe second builds the width tables all over again, and the third reinstalls
- Xthe width tables.
- X
- Xcalcfonts can be user-modified to emit more fonts. Near the end there
- Xare "do gen" invocations, eg:
- X
- X do gen("troffname", "English name", "HPLJ escape sequence", "set",
- X "pkname", "pkname", ....);
- X
- XTroffname is the name that the font will be known by to psroff/troff.
- XEnglish name and HPLJ escape sequence are for the lj.fonts file.
- XEach "pkname" is the name of a PK format file used to generate part of
- Xthe font, and will be MERGED with the map file called "pkname.set".
- X"set" should always be ROMAN8 (except for building S fonts when it
- Xshould be MATH8). If the pkname contains a slash (eg: cmr/foo), it
- Xmeans merge cmr PK's using the second token as the map name. Eg:
- X"cmr/foo" means merge cmr's using "foo.set". The escape sequence is
- Xonly used if you've selected a point size which is marked "b" (builtin),
- Xor is marked "n" (non-existent), and the bestmatch code in lj.c didn't
- Xfind an existing font (same typeface) at a "close enough" pointsize.
- END_OF_FILE
- if test 7816 -ne `wc -c <'LASERFONTS'`; then
- echo shar: \"'LASERFONTS'\" unpacked with wrong size!
- fi
- # end of 'LASERFONTS'
- fi
- if test -f 'fonts.lj/S.11.pk.UU' -a "${1}" != "-c" ; then
- echo shar: Will not clobber existing file \"'fonts.lj/S.11.pk.UU'\"
- else
- echo shar: Extracting \"'fonts.lj/S.11.pk.UU'\" \(6107 characters\)
- sed "s/^X//" >'fonts.lj/S.11.pk.UU' <<'END_OF_FILE'
- Xtable
- X !"#$%&'()*+,-./0123456789:;<=>?
- X@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
- Xbegin 644 fonts.lj/S.11.pk
- XM]UD``+``````````!":N``0FKK!+(0```",B+?XAU1U"_3+3\M/B+3\M/RT_
- XM+3\M/RT_+3+#+#+"/#+!3"+!$4P2LB3`+%2RQ4HL=)+'](+)]&++]$+-XD(L
- XM_VT?33\L@,!*)````"TF%/T39=-:JY<S:2@5)U<J$RE5+!(;4RT!(<42T1'Q
- XMT6TRTETRTUTB_3;1$1T2%<$AT"-;$APE62,:)U<E&"EC-YNJ735@H!TE````
- XM(QT<_1BS&_];Q[SUOQ"1WPD1O_6\>\];\;/`0"8````C'!3]$U711(HV%4@G
- XMG&C0H&D(H*S(9'061T$H=$Z'2.1TD@=%8'1$C@<(D<;)#@9)C<G*$8S.F
- XM5=%`R#<J````(Q88^A8M5=,Q/1,SPU.C<X.2@J-CLT/0,CTFU/34;2,CT#0[
- XM-CHH*3@W.C4\,ST3$]-=4J@)+0```",:`OP+V<`N/````",:&OP7VCV$UTUT
- XMUTUTV#V#V$UTUTUTU_3;3;3;3;3;/</;3;3;3;3;3;/(+CT````C&AK\%SVT
- XMVTVTVTVTVSW#VTVTVTVTV_3737373738/8/83737373738/:R!Q#````'!<?
- XM_A[9591DLF],%DPN-4T![55-5M#2@+!01````"8A(/X?Q!T_/1]<\17.$DS1
- XM-<P43+%5RA9,D77(&$QQE<8:3%&UQ!P$PQP5PAPDP1PUP!Q$L<5:'&21QU@<
- XMA'')5ARD4<M4',0_TQU0P$9(````(QPA_1^VUD1-(X/$I)3$@]$W311?330_
- XM734DU4%=6O08%*XDI*]!@4K57Q350ETU/TTT5-%'/1.$Q)2DPX/21$UFL,`R
- XM2P```"`=(/\?T1WN,]SB7:XA)-CB%$UN(634XAA-+B&DT!M<\<2QT%KQT4DM
- XM%7305)?0B!I.````'AD?_A[3XYX0'_&6&.*8CQEA!1XQGM/8%%`````B'1_^
- XM'@'T6UG@'$M)6U33T,A)4@```"$:'_T>W"324ETS-=,D34%%TR1=(E33%5TA
- XM9-(7397939797939/;+;';';'2&!TQ<=06'4)1U20=85'5)!U3,=12VQW!#0
- XM'E,````0#QC^$X9R4D+!TL+1WC+?/4MJ:VM;3>(L*D;`(E0````C'"#]'S7%
- XM6(@_IJ$U1$570D<_DR.1XK;:[53:;4TVP$!5````(1H?_1Y=/2;8XTUXTD%!
- XM2D-#1T1$145%0U5%4D9&0>161E%&1D)515-%145$1$=#0TI!04THU^--AM+3
- XM4,`T5P```",<'_T>;3U&VN),5T=?)&1D7H145'-44X1$1)-$0Z0T-+,T,]`R
- XM0CTLU8V>--IM33;`1E@````A'"#^'ZC5-CT3H[/#E,1TT45=%4330^9=-333
- XM1%T57TT4<]$X3$D\.RPL.CT"HG%BHF)QH7$18H)A(7&!<2F)/XB"N%!9````
- XM)B$@_A[5\=,TS!1<L53*%ER1=,@87'&4QAI<4;3$'`7#'!3"'"7!'#3`'$6Q
- XMQ4H<99''2!R%<<E&'*51RT0<Q3'-0ASE$<_UT?/3'$#`1EH````8%R+^(+73
- XM)2T!@K&BD<*#HH239*-RL]?B2E1()1-&-Q(V.54Z5#M32U,\0_3$-+0TQ#],
- XM-/2S5*-SHH.2HW+#0])LH#-<````(QHD_!R]*[2Y2Y2Y2Y2Y2Z.Z2Y2Y2Y2Y
- XM2Z.]2]2]2]2]2].]2]2]2]2]2]2]((O9J#)>````(QHD_!PKU+U+U+U+U+U+
- XMT[U+U+U+U+U+T[I+E+E+E+E+H[I+E+E+E+E+E+L@H]F8"5\````7%P,`]MO0
- XM.&$````=&!3^$Y4!,T+3<F%#@U$TDE$SHS$THS$DLS$O2S(23#$3],1/3#8\
- XM-CI7*1,D$R4U(A99,L!-8@```!H8*?\?TUU"4M$7+0&2L:*ALOD;.!PX'"@<
- XM.!PI%8H5$SH642GQPX'$;C'01>(=!&'$8L-Q$:1Q$:.!(8.!0D.A9<\=GC'9
- XMXAV@P#%C````&!8>_Q-EH4B!2G$[84)S43&B42*Q03'!0=3Q(=7B$1UN(M?B
- XM'7XBUN,M;B+7&L`Z9````!01(/X?M+)!DF%R<7+1/1+2\]%-%=!=!:>#0V-3
- XM5&)3<D1R/B2"+TD32"/T@5-R4W%R89)!M8#`'64````2#Q3^$Y9SH[.SM+._
- XM2[/B3.(]`M$M$E)V0,`X9@```!03*?X?SB'5;"4:$EH=0=0=0M,M0=0M0=0M
- XM0=3RT^0M/C/4+4/372;1C0C0?234XRLC+11PP#%G````%Q4>_A,T95$R,D)!
- XM,Q%R(42"+Q0Y1#DVXCDUXSDUXSDU.3<I/5\]3C/4XCU2<,`_:````!42(/X?
- XMM,(RHD.#4G-B<G-3<T1S0X,T=#.$XB2$%(0OTR2$'B2$)(,T=#.#0W1#<U-R
- XM<F-R4X-"HC+$L-`>:0```!`,%/X34J..,XXCCC.#<1-A$W$383)10C)D8,`S
- XM:@```!H6%/X34J-S=E-Q%&-2,G-!T3,=$S'2,ATUU*LV2?.#@Y-!XA.302.B
- XM,2.R,3+$,,`\:P```!L5(/T?4]<];SU4U?/535\]5-7SU4U?/535/432(4T"
- XM,\)#LT238X-S<X13HT.S,\04T#$]$Q+3,,`S;````!L8'O\3<J*CDXXSDXXS
- XMDXXCDY.30?-(-!1'1!1&$3,49!,C%#)51?/7XSU^(]@MD,`L;0```!85%/X3
- XM1*(GH^)#HU.34Z-?.38X-CDG."@W*38I-BHU*S0L,BT&TDU`P#UN````%!,I
- XM_Q^^(=5Z11@Q:#TDT?31Y$TSTS%J-A@A>"TRU!U"T^(M/B/4/372;1C0C1;2
- XM73/4*A8K%"T%8-`H;P```!83%/X3E<-"DG)C@T2#0Y0DE.(4J.*D%)0DDT.$
- XM0X-B<I)#Q9#`,7`````:%A3^$TU3UBUQ)147)A08%Q0=(D'2%1TA0M'R0M$5
- XM+0\E+#4L)CKS8Y-TDH)PP#%Q````&!4>_Q/%T3,L)BHG.#<W\X3B4Y3B0Y13
- XMA%\Y-D<W1C<R%"DS2_/4XSU.(]4M8,`H<@```!H7%/X3G1?3751%24<Y.3<Z
- XM-N([->([-O.C<Y.2DK)RT"0M-='`(G,````4%!3^$TTSU"U1)AHG&A<M4M4=
- XM7C+4/4\M3B/3/5+0P"YT````&184_A-$HE$RA#%"A2%#A!%3DQ%#LU.Q;B/!
- XM7SP6\[%_.A@Y&B@<)2T6D,!-=0```!L8*?X?U/'9XQV>,=GQUWT3,2.C05*"
- XM86)B<6-#<7(S<8,B@8/Q.!AO@8,3@8(C@7,R<7-#87)B86*"44.C(3/1?7\=
- XMGC'9XATPP$QV````'!D=_Q-$TQ,230$Q0]`82QHZ&T@=`W'1-ATD0=0T'4,Q
- XMU4$==-CSVCV$UQ$]8234%#TQ4](631%ST!@\&4H;.1Q#$QT3,2'40\!2=P``
- XM`!X;*?X?UN(=SC'<XQW!T4@6)1,G%4,4)Q52%#47014U$4-ADU-AD6XC8:
- XM%3<9%C8:%O-AD7-A@8-1@:)1<;-!4M$R$RU7V>(=SC'<\=3`.7@````<&Q0`
- XM$U'4)AU$0=53'63R'8,AV1(;&Q+QHK$1LJ$AL;$BH:(BDI(R@X)#96-+&FDI
- XMAT>D=)!X"7D````-`BW[(=+`(7H````7$"W](<2CPM`\[1/#P[25T4T3T3T>
- XMT3T3T2TCTD#((7L````7$"W](5T4T3T3T>T3T3T2TCTDH\+0/.T3P\.TE;#`
- XM)7P````C'!3]%%74$XTQ*]$114PA*$M+2"$L14$=&R'3@QU%#8`K"`U]````
- XM(QP4_11'TT?31\@N?@```!<0+?TAXBTN(M+B+2XBTN(M+B+2XBTN(M+B+2XB
- XMTN(M+B+2XBTN(M+RTA#`27\````C'"+](%6%B4E34R-3,W9S+RE)(3HJ7[*T
- XMY-M=DQ+9(CUS,M<D/5-3TS<M,H/1.3P[.CT#@](V/4-#UC(]@B+9;:]-SRT`
- XML!^A````%Q`I_1^!PO+!2Q$A&1(B%Q,C%"0D(18F'M-R<(`=H@```"TF$/T2
- XMI!K?&M&M&M&M$].I&K&K&K&K\:L8L!^C````%Q`I_1]^TR<6)A$D)"03(Q<2
- XM(AD1(1M,'RPQ<(`=I````"TE$/P2<:KQJAJAJAJAJ=$AK!K!K!K/&L&DR"JF
- XM````%Q(4_A0M--%L(CLC225')T4I-"I"\L:D(I-"=%)4<C22([;$T2TPP"JH
- XM````%Q(4_A33+13&LR*4,G125')#DB2F_")*)#DE1R=%*4,K,BQM%-,@F`FP
- XM````%Q<#`"+;R!JU````'A<<_1KM<M9=0Q+4(CTC,]`U5UC0T'C`&K8````>
- XM%QS]&H?0T(5U4]`S/2,BU"$]1>U]8L`KMP```!X5'/P8G'T533/4/4/5+5/5
- XM\M4]7RU@'_UCUO+6/6+6/6/6/636T9S`*KH````C&AS\&)U'UE38/9/9/:+:
- XM/:\MH]KE+;/;\ML]LML]L]L]M-O6G4#(*KL````C&AS\&-2=;;3;/;/;/;+;
- XM/;\ML^7;+:/]HMH]HMH]D]D]A%UGU)#`++X````C&B3\')U'UE38/9/9/:+:
- XM/:+:/:YBVSVRVSVRVSVSVSVTV]:=0*K]P,@LOP```",:)/P<U)UMM-L]L]L]
- XMLML]LML^;;+:/:+:/:+:/9/9/81=9]0++]P0J`S(````'A<-_0_3ZKH@P!7,
- XM````%Q`2_1-6BEP_T1!S\=$\6H90L%?-````+28K_2##C/PLI87&3"3#/&/!
- XM/(.SRCD\PX+.)SSC4]`T\M(C/2,O+4(3U%Z-9=0_$M0B/2,_+2)#T#4\XW+.
- XM*#S#D\H[/(/!/&/#3"3&6%RL+/C#T!S.````%`TJ_1]AOE.^,7,A(QT3(2-^
- XM(;X!,[YA8,`ESP```!0-*?T?8;Y#OQ<4%!'=XF&^0['<&^0[XA;=$4%!?QOD
- XM.Q;`+]4````3$2O](,/0(AP2/Z(4HB*CT>0M'D/1+1YCT2T>0]'D+1.B(J]!
- XM*C(<$BT#P-!.V````!<2)_XBWRF8)#@F)R<U)U0G(2,W(3(H(B(G,B(G(R$W
- XM(V8S;B8D931N)25D-6XD)F,V/Q(R<B,38R,2<S\A)R5&)R8H-"F),!'RT,!R
- XMV0```"TF*_T@THW\VTA-=,34/3/2+7+0+9*RVRGRW2<M\E\@$20M"8(RPV."
- XM(K-D@B*C=((2I(*DI-=*/83EE-@A*3UR(I36(BE*&",I.A<D*C@8)"LU*24L
- XM:B?RW2DMLK+9+0+7+2/3/43$UTA-O-^-(*@-V@```!P5%_T6T>M[;1"("^``
- XM```H#2WO(-OJUX@,X0```"@-+>\BZM9]4,`;X@```"@.+>\@PJ24E)24E925
- XMCUAH6.)H6.WF@,`=XP```"@/+_@BGM%OAH:&AH65=I/&Q;6VIJ:O:NT6R!KD
- XM````*`XM[R+MYI6>)I66GUI:2EI+2TM+3""(#/`````H#BWW(-OJV&"P#/$`
- XM```H#BWW(H[:`^#8&O(````H#RWX("U,3$Q,3$M;];];]:]J6N`=8,@=\P``
- XM`"@.+^\B[1:?:6E:6EM;6SE75UA86&?V?M%HT!OT````*`\M^"*>`=:5GVGU
- XMGUGUE:2DI*2DI++0N`KU````*`8O[R(/X*@)]@```"TL`0`,T;`M^P```"TF
- XM&OT7PQV/+7+7\M<M?/G2<]4]1=-==-A-@]DMG1K/P"V2V?+9\MD<H-@+_```
- XM`!P5%_T6`!Y0L"W]````+28:_1?*'9\MDMGRV2P,^M+8/9/877743435/6*-
- XD&L_7+7+7\M?RV!PPT!'^````(QP@_1[>`0+0.NS2T#KU]O;V
- X`
- Xend
- END_OF_FILE
- if test 6107 -ne `wc -c <'fonts.lj/S.11.pk.UU'`; then
- echo shar: \"'fonts.lj/S.11.pk.UU'\" unpacked with wrong size!
- fi
- # end of 'fonts.lj/S.11.pk.UU'
- fi
- if test -f 'fonts.lj/S.14.pk.UU' -a "${1}" != "-c" ; then
- echo shar: Will not clobber existing file \"'fonts.lj/S.14.pk.UU'\"
- else
- echo shar: Extracting \"'fonts.lj/S.14.pk.UU'\" \(7707 characters\)
- sed "s/^X//" >'fonts.lj/S.14.pk.UU' <<'END_OF_FILE'
- Xtable
- X !"#$%&'()*+,-./0123456789:;<=>?
- X@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
- Xbegin 644 fonts.lj/S.14.pk
- XM]UD``.``````````!":N``0FKK!D(0```"TK._TKW2_</]L]OSV_/;XCV_/;
- XM\]OSV^(]OSV_/;\]OSQBQSQCQSQ4QSQ!%,4\,B3%/"%$Q#R4PSR4PCRTP3R_
- XM3`/-2SS4H\])//](/1]&/3XD0]7T(]?WV&VEVDW//-#`:R0````]-AG]&)?9
- XM?2T-3+T]!S652;63<Z>4T"4\=STR0M)E/4(RU&,]8B+583UR$M:MA->-E-AM
- XMI-EME-IMA-F-=-BM8A+7,6U2(M8S;4(RU#5M(D+3-WPU+027HW.5N465-]#3
- XMO-30TGV7D'`?)0```"\H(_T?BDFVF>.`F6FT#Z`@#Z2;:9XX"9:;2*#`4B8`
- XM```O)QG]&(;75JTW31Q71FI)*E@Z+%8Z/05#LM)2/"TU$[+5?"U6T"UET"UT
- XMT"UUPM=K+6?"U#%;+4,EHM,T6BT39:+#A9.4IH15R6K3>&UUP$<J````+QP=
- XM]QP2VEV3$]=!350TTT5-%'3$E*2TA-!&321$U$)-:-AMI-IMB-9"341$TD9-
- XM!(2TI)3$=-%%330TU4(]=]DQ+:)H"2T````O)`/[#]6P.CP````L(2'['M(]
- XM!<Y\QLULULULULULULULULULULULUL]-%M%M%M%M%M%M%M%M%M%M%M%M%M%]
- XM!=(PN#H]````+"$A^QX])=%M%M%M%M%M%M%M%M%M%M%M%M%M%M%,]LULULUL
- XMULULULULULULULULULULY=`](,@B0P```"(=*?TH_?9-!F33-O34)DU1;TU2
- XMY%36'MI4W%UOTM&P9$0````N*"G]*,?RV?37;6$4U1)=0333%%TA5-$670%T
- XMSQA<X93-&ES!M,L<!<H<%,D<)<@<-,<L-<8<5,4L5<0<=,,L=<(<E,$LE<`<
- XMM+++6AS4DLU8\<]'\=%%\=-#'44MH0-`P%](````*R4I_2C1G=-SV3L]5-!-
- XM(]0]!-1+362?381TVD5=I43<0^)=Q23>05WJ]!U!2N)-9*]!U!2MY13>0N)=
- XMQ33<1%VE5-I&785TV$E-9+3430/4/23035.SV3<]V='`44L````F(BG^*-/B
- XM(!+B0!!M_Q%-X27=\33<%%V_%4VA9=GQ=-@877\936&EU?&TU!Q=/QT$TAT5
- XMT?'230'37/'42QU5KQUDDM98+71EU6/YT,!P'TX````E(2G^*!XI<N0940M_
- XM&+&$XHV$\8L0U^09<Y7=F!%0````*2,I_2C<ZZ5*=%^D>D"X6%(````H(BG]
- XM*/U23)<ERT-<LT3,)%RR5,PE3+)5RB9,L67*%UR1A,D872723272723272/4
- XM'4\=0=0=3QRAD<L8',%QS"]AS24<TE'.)!SC,<U3'*@M0=40P#)3````%A<?
- XM_QC(S0A71CP6/6+7+7/6XCUN)-=-9=5]1]2-.=.=.-1]5M;TUO/2$STGU4FP
- XM.50````K)2G]*%7%6)P97`JSPHP2-E=6,2I&.CP$0\`L$T/`+!,SP1PS(]$R
- XM+3(3T_;375[*34;._$K`4%4````H(BG]*)_3VF`0Y$WJV$)"33-44\1D9)1T
- XM='2$A%24E#64E2]*2D'D6DI?%*2D)925-)245(2$='1TE&1DPU13TT)"38K>
- XMY$`0;:_3D+!$5P```"LE*?THO\3.;4Y$Q%P$M22TI%]*24?H24A).4A)XDA'
- XM2SA'/`1T9,$W1CPS9%/%-40\<T0SRD%!3.C3Y$U&SOQ*P%98````*"0I_BC0
- XMK:2$U4Q-(],]`]4[/7.4UT=-E%]=E3YUVU--M$795?391EUU=-=)\]<[\]4]
- XM`M4M$],]+RTRCQ@M$H'Q&!T1@2&"PH$B@<&"*\L_K**X95D````S+"C])@//
- XM'>-M0D;3-6TB==$H;0*5SRILXK7-+`;,+!7++";)/#7)+$;'/%;&+&;%/';$
- XM+(;#/);"++7!+,;`+-6RSFHL]9+0:"T5<M)E/352U&,]5B+683U_C9;;]-TL
- XMD,!C6@```"`>*OTHT7U\U$9-(K3"T#LM(Z302%T3A=%(/23=3=XUN56<182"
- XM-62R)530$55-$15%TF1--C735$U%-=13734_744UU$1=-4341?331DTD=-(Y
- XM30.SP\2CT49=2]A],)!%7````"\D,OLEN"MDM&LFLFLFLFLFLFLFLFLFLFLF
- XMLFLFLFLFM$MFMFMFMFMFMFMFMFMFMFMFMFMFMFMFMEMTMS`!+[@=X)A$7@``
- XM`"\D,OLE*X2V:V:V:V:V:V:V:V:V:V:V:V:V:V:V:V:V2T:R:R:R:R:R:R:R
- XM:R:R:R:R:R:R:R:S6T2V,`%0N!W@B`E?````'1T#`/+>P$QA````)R$9_1BW
- XMV[UU5*)DA()DI')4M')$T$4D70121-%$)%T40D714B1=)2)%TE$E73=5TV9-
- XM17XDU$A-)I30>CLS-21&5$,FQXA[5,!D8@```"(B,P`GVFW+V%5-8Y34+#TR
- XMT$T2T4T"TD_"TT^RTTLM0\+32RTTPG<4T/)LT"AQ3"TTSRU$KC+52>,M58\]
- XM19/42CTTI=%:(2T4LB+$PC.$T"70T2>=/R`2XR`2XR`2(!/`16,````?'R7_
- XM&(;2)JT"7+)="B72DD2%<D/#<D+1)B0M(U)"TR0E'4)"VC(MPB+<XB$MWTWN
- XM(]_B+?\]\M_C/>XCW_(!`='`260````;%RC])]%=.=`U.D@I.2@]9-;SU_36
- XM75?4?4?5;2G%%J1&A'1TA&2D1:1$PS]<,O70(_7#--`D3#3TPE2R=)-T@Y1C
- XMN]%[P"5E````&1,9_1BXFG703131313170]='2/3/E72]---,Z%D9&NG4,!'
- XM9@```!L9,_XGT^,MJ-.M&M`R;0/8/8/8/8/8/9+9/8\]CSV//8XSV$V.,]GB
- XM39387877C5K3S2O4G6?839XCTA8]$T/3C660P#QG````'QLE_QA%EF=I0C0S
- XM5#)$$W025I025;,25:95ME3$]TQ.-DQ&XTQ&XTQ&3$@M!-KTV>--GC393;*`
- XMP$=H````'!<H_2?173C1-#PU.S<Y.#A(3V24]4I/1+0UI32UXB6U%;4OV"6U
- XM'B6U);0UI3]+1/2D7TE&2$@X.3<[-3PT/1C371#0(VD````6$!G]&'+?2^-+
- XMXDOC2_3$@A22%((4DA2",W)$0VF%@,!`:@```",=&?T8<M!)2GA(ET@R2$<D
- XM.48M1$/41"UD,M=!/8G6T=)$C02%Q)2TM*XDM&+Q3#8B3$0C3$,C31=2U$7`
- XM3VL````D'BC])W3<?=7=7=3=7=3=]=U-U=U-WUW4W5W4W?7=3=]=MMJ-@R37
- XM,UU31=0V33-UT3E-!)6TI:3$E-!7321DTU1-13360DUU(ME0P#]L````)2`E
- XM_ABBT2T/3$OC3$OC3$OC3$M,3/3$4E2U4D6T4E6E4E:"%$)74R0R5!I'9#:$
- XM?TWN--[C3>0!`@$`P#AM````'AP9_1A5TB+YT45=!&]-%%]=!&]-!&7$=;2$
- XMPY2TA:25E*24M(/%<]!5311$TT)=.M5]A-O`2FX````;/_)]+C+9G,O0E3
- XM:5U5U5UDUO75XUU_7748O]"C**/7/7/7/8+8/8+8XSV$UUUVU8U*T[T=#1O3
- XMG5;738/0%SQ$/1G49]`T;P```!T8&?T8MP$;M524A'249+1$Q#7$--45U174
- XM'B75%=0O35),4TQ$2T9)2#A*1%R@$FS`.7`````C(!G^&'VVWDWDWS1B8K."
- XM4K\I)BV28M@U/8\F/7\V/6XC<]5'/5.$T_2$TDE=%*31.TT3PJ#`07$````?
- XM'"7^&--M>M1$32-TT#E+.DH[24M)/%=,5TQ'XDQ73$?TQ73$A+2/6DEH.T$E
- XM2T.<1%TO3:XTVN--I-PMP,`Z<@```",?&?T8O6K9?:?;9F702EM,2DT$I-$Y
- XM32.4T4CC322$T4D]))/12CT3M,/0.ST4D]-&36K:;6#`)W,````;'!G^&'UV
- XMVDVDVS1RT3DM#RH]SRW.(]OB/;]-OSV^)-I-PM7`/W0````A'1G_&&32)GT$
- XM0S.V(E2F(E2U$F3$$E30;V31*/32*$T2CTTBA-$H32*/31*4T"I,+$LL23T5
- XM8]2MA[#`7'4````D'C/])]CRWN,M[C+>XRWBVLT]/%0D2D4F1T<G14@H-$DH
- XM0SDI0DDJ,4HJ,4HICBHJBBE!22I!22HR22E"22A$."A%1R='1B9)121-#2U+
- XMVO+>XRWN,MXM<,!C=@```"8A)/X85=D3C7(C-=0C)%TR,F71+030+16RTTHM
- XM18+55SUD8]=5+91"VD,MM1+=;>]0$$WUWGW#%-PB7:(UV25-@F76)UU2E=,J
- XM72+$T2T%P]%5(STE4C+44R,M:#+95+!I=P```"@D,_\GSBU>,M7C+5XRU?+&
- XM3`*"9[)T0S.2=B)4@G8B5(*%$F2"E!)4@J;V2"LH22LH2"P"A(*RCTDK*$@K
- XM*$DJ.$DJ*4DI*D@I+`1R@L%')RPU4E/%8B1,C"S9TBU>,M7C+5\LD,!%>```
- XM`"8B&?X88=HG+913V&0MEC+;4RW$(MTS+>(BT"T"+RQ,(>(L3"(L/",L.S,L
- XM.R0Z.S0Y635&AD;??!T(L[J5C16%P"@)>0```!`#._HKWL`J>@```!P3._PK
- XMTDQ-$](](]+M8](](](]%,3534/4/4/4[6/4/4/4/4350,@J>P```!P3._PK
- XM3534/4/4/4[6/4/4/4/4353$T3TCTCTNUCTCTCTCT4Q-(+`Z?````"\H'/T;
- XMA<X6K*),')(\/((F5L8R2EQ#$\%<(R/"7!,3Q%I"/&96(LC#,LG!0LJG'-4`
- XM&EVA`T`X$7T````O*!W]'(P6(/VT#]8AC,@Y?@```!P5._TK+6\];B/6XCUN
- XM(];C/6XCUN(];B/6XCUN(];B/6XCUN(];B/6XSUN(];B/6XCUO/6(+!D?P``
- XM`"\I*OTHAL%L&YN<)<)U935E5*04I$/`,3P#/SPEPC(\,\,Q\\0\1L4L1N37
- XM/Q/5,_/3-?/1-SSSA,U)3+2TR4P4QTPTQ4Q4PTQUM<E97,1TST5-%#33,SU3
- XM$]9]==GB/'"P):$````>%S/])[+(/']<5\.<$Q,3LR,CDS,S9$-$)&-D$8.!
- XMOMHZH"6B````/385_1C/\MD]DMD]D]D]D]E#VA!`U4UCUSUSUSV"V#V/*K`E
- XMHP```!X7,_TGKMH[@11C9"1#1&,S,Y,C([,3$\&<-\7UQSR2J@):0````]
- XM-A7]&*\M@]@M@]<]<]<]9-4$`=HTV3V3V3V3V2V3V?+/P$.F````'AL=_QP2
- XMVTVFV(UC%M0S;2-6T#=<.5HZ:#QF/19#TV(]6==]51/38CT60\9CIH.5HW7#
- XM5M`S;2,6U(UFV$VRV\!$J````!X;'?\<W"VDV%UXU&$])C/093Q7.EDX:C9L
- XM-&T3)M,Q75?7,5U3)M,T;1-FPX:CI9/%<]!E/28SU&$]:-AMI-P@B`FP````
- XM'1T#`"S>P".U````*2(D_2(2`07MO?/Q/=,SVS1-E%371UTUEZ?-?3T]BL#`
- XM([8````I(B3](LK8T]/7QZ>5TU=-=%391#VS/SW3'ML]\Q(!`L`SMP```"D>
- XM)?L@T=.]:=AWV5VTW$W$W3W?/=XCW>(]X%#BW^(]_SWSWDWDWDWEW7W-B];1
- XMT[`PN@```"\D)?L@PLJ\V<]WT%TDTTTTU#U//4XCU.@];B/6\]8]5-5-5-5=
- XM1]//O-PLH+`QNP```"\D)?L@')PLW`SM-]1=5-5-5-4];SUN(];H/BU#U//4
- XM/433333270>,Z<W`R<*P-KX````O)#+[)<+*O-G/=]!=)-----0]3SU.(]3H
- XM/6XCUO/6/535353574?3S[S<+*`!3M8=<M:P-[\````O)#+[)1R<+-P,[3?4
- XM75353535/6\];B/6Z#XM0]3SU#U$TTTTTET'C.G-P,D`%:UBUQUB>`S(````
- XM*2(0_13>Z$ESP![,````'A<7_1F'T;K2?47]8_V!"4\=@_UEU'TJO1>`H&C-
- XM````/38U_2B[K-M\>[PXJ+]K=KMKMKA;];9,-+1,5+),=+!,E*/+.3S3=,U&
- XM//->(]$SXCTS'J/5/B$],SXCT34\\V3-1SS3D\LZ3)2P3'2R3%2T3#2V6_6X
- XM:[:[:W:_BHP[O'M\VKNP'LX````;%#3])Y+%Y4Q>4J1"1!W!1"1*Y"Q>R4Q>
- XM<I"P+,\````;%#/])Y+%Y$Q>0I<B+6(B?DDL7D3%+:+%Y$Q>0I<B+6(B?DDL
- XM7D3%*<`[U0```!D9-?THU4UVU3,M0C3BTC)=$T/2XSV.)-CSV.5-?F37Y4V/
- XM/8XDV.,]$U/0XE,]%#/3)"U7UDU0P%+8````'A<P_2O4+7\]!1.\I%23A'1V
- XM8X9?.3$T.#(S2#)"\Y,S(X-#'T@TCC<UCC8VCC4WCT.$$T.#+S,Y,O0CA#\Q
- XM.35H-F='1TE%2LNL\]<M0+"AV0```#@Q-?THR)V</4Q]!Y?-7#7*7'7'7)7%
- XM3-3#3/3!312TTTH]4Y\]<W\]DU/';"-#Q#8L`S/$*AP#(\,J.S(\(Y2S(\$Z
- XM2S$\([+!;\$\]N7`3/,3M,XR/`/.,CP$S3(\$\(:,SP#PADT/!/`&C4\$L`9
- XM-CPBH:-SPC8J.#Q'P#D]4Z332TT4P4STPTS4Q5R5QUQUREPUS7E]#'U,/9G(
- XMB`W:````(AL<_1O;Z<G-L*@,X````#(1.^LJ!3[8H*@,X0```#(1.^LL[8>@
- XM3,`AX@```#(3.^LJTST5T&QL;&QL;&SVQL?&Q\;/?&SC>^`6?,`JXP```#(3
- XM/?<LSM1^*WM[?&QL:WMK>FT$TFTGT6T7T6T6T6T'T'T.)]#M1[@GY````#(3
- XM.^LL[7?!XWP6P??!;!?!;!?!;"]L)L)L)L)L)L)L)L)<0Z@,\````#(1._4J
- XM!,[8IZ`,\0```#(1._4LKM@%,+@G\@```#(3._<J/$7";";";";";";";"]L
- XM)L%\%L%\%L'WP6P>-\'M=\@J\P```#(3/>LL[4?0XGT'T'T&T6T6T7T6T7TF
- XMTDT&I[:WML;&Q[>^)[[4?,`A]````#(3._<LS@%GX[?&SWQL?&Q\;/;&QL;&
- XMQL;&T%T3TQ@*]0```#('/>LL#Y"H"?8````W-P$`$-R@0/L````]-B/]'[H=
- XMD]=-9-<]=-9-9-9-;-LL^PT*357473?1C3?7;7;7787778S[+.L\RU38/838
- XM38/83838/9'%V`O\````(AL<_1L`+V"@0/T````]-B/]'\4=D]A-A-@]A-A-
- XMA-A+3-LL^QT-A-A=A==]:-1])M-M1=1=5:S['.L\S637/73637/73637/9&Z
- X:4!3^````+R@I_2=M*`YK-LTN:6TVS2#U]O;[
- X`
- Xend
- END_OF_FILE
- if test 7707 -ne `wc -c <'fonts.lj/S.14.pk.UU'`; then
- echo shar: \"'fonts.lj/S.14.pk.UU'\" unpacked with wrong size!
- fi
- # end of 'fonts.lj/S.14.pk.UU'
- fi
- if test -f 'man/cat.5.S' -a "${1}" != "-c" ; then
- echo shar: Will not clobber existing file \"'man/cat.5.S'\"
- else
- echo shar: Extracting \"'man/cat.5.S'\" \(7583 characters\)
- sed "s/^X//" >'man/cat.5.S' <<'END_OF_FILE'
- X.\"@(#)cat.5 2.3 91/03/20 04:11:28 (Henry Spencer/Chris Lewis)
- X.TH CAT 5 "Psroff %%T2VERSION%%"
- X.DA 4 April 1981
- X.SH NAME
- Xcat \- C/A/T phototypesetter code/width tables
- X.SH DESCRIPTION
- XThe Graphic Systems C/A/T phototypesetter is driven by sending it a
- Xsequence of one-byte codes
- Xwhich specify characters, fonts, sizes, and other control information.
- X.PP
- XThe C/A/T's basic unit of length is 1/432 of an inch (6 units to a
- Xtypesetter's ``point'').
- XThe quantum of horizontal motion is one unit.
- XThe quantum of vertical motion is three units (1/144 of an inch, 1/2 point).
- X.PP
- XThe top two bits of the code classify it as one of three major
- Xtypes:
- Xan \fIescape\fR code (top bit 1),
- Xa \fIflash\fR code (top bits 00),
- Xor a control code (top bits 01).
- XA code of all zeros is ignored; a code of all ones is illegal.
- X.PP
- XA flash code specifies flashing one of 63 characters, as given by the
- Xremaining six bits.
- XSince this is not enough to specify all possible characters, or even
- Xall characters in a single font \(em there are 108 per font \(em
- Xvarious control codes (described later) select a font and either
- Xthe Lower or Upper half of the font.
- XThe Lower half is the first 63 characters of the font; the Upper
- Xhalf is the remaining 45.
- XA flash code of 46 or higher in the Upper half is illegal.
- X.PP
- XAn escape code specifies horizontal motion.
- XThe size of the motion, in horizontal quanta, is the one's-complement
- Xof the low seven bits of the code.
- XThe direction of the motion is set by control codes.
- XHitting the right or left margin limit switch is illegal and will
- Xcause the machine to stop.
- XThe machine starts out, after initialization, hard against the left
- Xmargin limit switch; an initial escape of 16 units \fImust\fR
- Xbe given before starting work, and the position after this motion
- Xshould be the limit of all future leftward motions.
- XFrom this point, the distance to the right margin limit switch
- Xis about 7.5 inches.
- X.PP
- XA code with the top three bits 011 is a \fIlead\fR code,
- Xspecifying vertical motion.
- XThe remaining five bits are the one's-complement of the size of
- Xthe motion, in vertical quanta.
- XThe direction of motion is set by control codes.
- XThe amount of vertical motion is, in principle, limited only by
- Xrunning off the paper in the upward direction and by the limited
- Xcapacity of the output cartridge in the downward direction.
- X.PP
- XA code with the top four bits 0101 is a size-change code, which
- Xspecifies movement of the lens turret and the doubler lens to
- Xchange point size.
- XThese codes are as follows:
- X.PP
- X.RS
- X.nf
- X.ta 2c
- XSize Code
- X
- X6 0101\|1000
- X7 0101\|0000
- X8 0101\|0001
- X9 0101\|0111
- X10 0101\|0010
- X11 0101\|0011
- X12 0101\|0100
- X14 0101\|0101
- X16 0101\|1001
- X18 0101\|0110
- X20 0101\|1010
- X22 0101\|1011
- X24 0101\|1100
- X28 0101\|1101
- X36 0101\|1110
- X.DT
- X.fi
- X.RE
- X.PP
- XSize changes involving the doubler lens alter the horizontal position.
- XChanges from single to double sizes should be followed by a forward
- Xescape of 55 quanta; changes from double to single sizes should be
- Xfollowed by a reverse escape of 55 quanta.
- XThe single sizes are 6, 7, 8, 9, 10, 11, 12, 14, and 18;
- Xthe double sizes are 16, 20, 22, 24, 28, and 36.
- X.PP
- XThe control codes with the top four bits 0100 specify miscellaneous
- Xcontrol codes, not all of which have valid meanings.
- XThey are:
- X.PP
- X.RS
- X.ta 6c
- X.nf
- Xinitialize 0100\|0000
- Xstop 0100\|1001
- Xupper rail 0100\|0010
- Xlower rail 0100\|0001
- Xupper mag 0100\|0011
- Xlower mag 0100\|0100
- Xtilt up 0100\|1110
- Xtilt down 0100\|1111
- Xupper font half 0100\|0110
- Xlower font half 0100\|0101
- Xescape forward 0100\|0111
- Xescape backward 0100\|1000
- Xlead forward 0100\|1010
- Xlead backward 0100\|1100
- Xsoftware cut 0100\|1011
- X.fi
- X.DT
- X.RE
- X.PP
- XThe \fIinitialize\fR code causes leftward motion to the left margin limit
- Xswitch,
- Xand sets the following modes:
- Xescape forward, lead forward, lower font half,
- Xlower rail, lower mag, tilt down.
- XNote that the left margin limit switch does not define a precise
- Xposition, and hence reinitializing the machine
- Xwill destroy precise left-margin alignment.
- X.PP
- XThe \fIstop\fR code stops the machine, which must be manually
- Xrestarted (normally after changing output cartridges);
- Xthis code should be used only at the end of a run.
- X.PP
- XFonts are selected by the combination of \fIrail\fR, \fImag\fR, and
- X\fItilt\fR.
- XThe tilt codes do not exist on the 4-font C/A/T; this is the only
- Xuser-visible
- Xdifference between the 4-font and 8-font machines.
- XThe correspondence between rail/mag/tilt and font number is as follows:
- X.PP
- X.RS
- X.nf
- X.ta 2c 4c 6c 8c
- Xrail mag tilt 4font 8font
- X
- Xlower lower up 1 1
- Xlower lower down 1 2
- Xupper lower up 2 3
- Xupper lower down 2 4
- Xlower upper up 3 5
- Xlower upper down 3 6
- Xupper upper up 4 7
- Xupper upper down 4 8
- X.DT
- X.fi
- X.RE
- X.PP
- XThe \fIsoftware cut\fR code should not be issued to the hardware, but
- Xis used by local spooling software to indicate places where it is
- Xlegal for the spooler to break output between pages.
- XThis code should be followed by an \fIinitialize\fR code.
- X.PP
- XA complete C/A/T file should begin with an \fIinitialize\fR code followed
- Xby an \fIescape\fR-16 code,
- Xand should end with 14 inches of trailer and a \fIstop\fR code.
- X.SH "CAT WIDTH TABLES"
- XBack in the origins of CAT troff, the width tables were generated
- Xby compiling a C source file that contained a initialized array of
- X224 characters.
- XEach character was formed by or'ing the width of a character
- X(width of a 6 point character in 1/432's of an inch) with kerning
- Xinformation shifted left 5.
- XThe kerning information was generated by or'ing together a "2" for
- Xascenders and a "1" for descenders.
- XThe width of a character had a maximum of 63.
- X.PP
- XIn the Version 7 troff (and many later troff's, eg: Ultrix and Sun),
- Xthe a.out header produced by the compile/assemble step was left on
- Xon the front of the file when installed in /usr/lib/font.
- XIn these cases, the supplied troff knew to skip the first
- X"sizeof(struct a_out)" bytes (usually a magic constant instead
- Xof include "a.out.h")
- Xbefore reading the table.
- XOther versions of troff (eg: Xenix) have special width table builders
- Xthat produce width table files that do not have any extraneous gunk.
- X.PP
- XIf the vendor supplied width table files (eg: /usr/lib/font/ftR) are
- Xprecisely 224 bytes long, HEADERSIZE should be 0.
- XIf they're not 224 bytes long, you'll have to have HEADERSIZE set properly.
- XUltrix and Sun (and probably all other BSD-derived 32 bit machines)
- Xuse HEADERSIZE 32.
- XI think Version 7 Unix on PDP/11's was 14.
- X.PP
- XRather than document which character is which entry in the font tables,
- Xthe interested user should consult the
- X.B cattab.c
- Xsource file in the
- X.B psroff
- Xdistribution.
- X.SH "PSROFF NOTES"
- XHenry's manual page doesn't document the flash codes for each character,
- Xnor the width table indices, but in
- Xthe \fIpsroff\fP source code, they are listed in \fIcattab.c\fP.
- X.PP
- X\fISoftware cut\fR isn't used in \fItroff2ps\fP, because it only
- Xexisted at University of Toronto ages ago - \fItroff2ps\fP calculates
- Xpage breaks based upon y position and the page length (which is why
- Xit's really important to get \fItroff2ps\fP and \fItroff\fP to
- Xagree on how long the page is, ie: -rL/.pl etc).
- X.PP
- XBerkeley troff introduces one or two extra magic CAT codes which are
- Xdocumented in the
- X.B defs.h
- Xsource file in
- X.BR psroff .
- X.SH HISTORY
- XThe \fIsoftware cut\fR code is a local invention.
- XThis manual page written at U of T by Henry Spencer.
- X.PP
- XThe "PSROFF NOTES" and "CAT WIDTH TABLES" section written by Chris Lewis.
- X.SH BUGS
- XThe documentation and the hardware disagree on the initial tilt setting;
- Xthe above describes the hardware.
- X.PP
- XIt's not the fastest or most modern typesetter.
- END_OF_FILE
- if test 7583 -ne `wc -c <'man/cat.5.S'`; then
- echo shar: \"'man/cat.5.S'\" unpacked with wrong size!
- fi
- # end of 'man/cat.5.S'
- fi
- if test -f 'utils/dumpft.c' -a "${1}" != "-c" ; then
- echo shar: Will not clobber existing file \"'utils/dumpft.c'\"
- else
- echo shar: Extracting \"'utils/dumpft.c'\" \(7283 characters\)
- sed "s/^X//" >'utils/dumpft.c' <<'END_OF_FILE'
- X/*
- X Copyright 1985, 1986, 1987, 1988, 1989, 1990, 1991 Chris Lewis
- X All Rights Reserved
- X
- X See the LICENSE file for a full description of restrictions under which
- X this software is provided.
- X
- X Function: Dumps CAT width tables in various formats
- X */
- X
- X#ifndef lint
- Xstatic char SCCSID[] =
- X "@(#)dumpft.c 2.7 Copyright 91/02/20 09:11:14 Chris Lewis";
- X#endif
- X
- X#include "../defs.h"
- X#define NUMPER 8
- X#define WPER 54
- Xint dotab = 0;
- Xextern struct cattab tabN[], tabS[];
- X#ifndef ASCIIWIDTHS
- X#ifdef HEADERSIZE
- Xint skip = HEADERSIZE;
- X#else
- X#include <a.out.h>
- X#ifdef X_EXEC
- X/* Xenix I think.... */
- X#define HEADERSIZE sizeof(struct xexec)
- X#endif
- X#ifdef F_LNNO
- X/* COFF format headers */
- X#define HEADERSIZE (-sizeof(struct filehdr))
- X#endif
- X#ifndef HEADERSIZE
- X/* Generalized V7 or BSD - non-coff format headers */
- X/* This is the only one likely to be useful - Xenix doesn't
- X need headersize, and I've not seen a COFF version of troff
- X yet */
- X#define HEADERSIZE sizeof(struct exec)
- X#endif
- Xint skip = HEADERSIZE;
- X#endif
- X#endif
- Xint guessflag, verbose;
- X
- Xdouble ditres = 1;
- X
- Xmain(argc, argv)
- Xint argc; char **argv; {
- X register int i;
- X register int j;
- X int c;
- X register int k;
- X extern int getopt();
- X extern char *optarg;
- X int found;
- X struct cattab *ct = tabN;
- X while((c = getopt(argc, argv, "vgdstwfh:")) != EOF) {
- X switch(c) {
- X case 'd':
- X ditres = (double) 300 / 432 * (double) 10 / 6;
- X break;
- X case 's':
- X ct = tabS;
- X break;
- X case 'g':
- X guessflag = 1;
- X break;
- X case 'v':
- X verbose = 1;
- X break;
- X case 't':
- X dotab = 1;
- X break;
- X case 'w':
- X dotab = 2;
- X break;
- X case 'f':
- X dumpexamples();
- X exit(0);
- X#ifndef ASCIIWIDTHS
- X case 'h':
- X skip = atoi(optarg);
- X fprintf(stderr, "skip: %d\n", skip);
- X break;
- X#endif
- X case '?':
- X fprintf(stderr,
- X "usage: dumpft [-v][-g][-s][-f][-t][-w][-hheadersize]%s\n",
- X " < cat width table\n");
- X exit(1);
- X }
- X }
- X if (guessflag) {
- X guess();
- X exit(0);
- X }
- X
- X#ifndef ASCIIWIDTHS
- X for (i = 0; i < skip; i++)
- X c = getchar();
- X#endif
- X k = 0;
- X for (i = 0; i < 224; i++) {
- X found = 0;
- X#ifdef ASCIIWIDTHS
- X scanf("%d", &c);
- X#else
- X c = getchar();
- X#endif
- X for (j = 0; ct[j].ch_name; j++) {
- X if (!ct[j].ch_name[0])
- X continue;
- X if (ct[j].ch_wididx == i) {
- X ct[j].ch_info = c;
- X found = 1;
- X if ((dotab == 1 || dotab == 2) && ct[j].ch_catidx == NTC)
- X continue;
- X switch(dotab) {
- X case 2:
- X if (k % WPER == 0)
- X printf("%s.br\n", k == 0 ? "":"\n");
- X if (strlen(ct[j].ch_name) > 1)
- X printf("\\(%s", ct[j].ch_name);
- X else if (strcmp(ct[j].ch_name, "\\") == 0)
- X printf("\\e");
- X else if (strcmp(ct[j].ch_name, ".") == 0)
- X printf("\\.");
- X else
- X printf("%s", ct[j].ch_name);
- X break;
- X case 1:
- X if (k % NUMPER)
- X printf("\t");
- X else
- X printf("_\n");
- X if (ct[j].ch_name[0] == '\\') {
- X if (ct[j].ch_name[1] == 0)
- X printf("\\e\t\\ee");
- X else
- X printf("%s\t\\e%s", ct[j].ch_name,
- X &ct[j].ch_name[1]);
- X } else if (strlen(ct[j].ch_name) > 1)
- X printf("\\(%s\t\\e(%s", ct[j].ch_name,
- X ct[j].ch_name);
- X else if (strcmp(ct[j].ch_name, ".") == 0)
- X printf("\\.\t.");
- X else if (strcmp(ct[j].ch_name, "=") == 0)
- X printf("\\&=\t\\&=");
- X else
- X printf("%s\t%s", ct[j].ch_name, ct[j].ch_name);
- X if (k % NUMPER == (NUMPER-1))
- X putchar('\n');
- X break;
- X case 0:
- X if (i == 0) {
- X printf("spacewidth %d\n", (int) ((c&0x3f) *
- X ditres + .5));
- X printf("charset\n");
- X } else
- X printf("%s\t%d\t%d\n", ct[j].ch_name,
- X (int) ((c&0x3f) * ditres + .5),
- X (c >> 6) & 0x3);
- X break;
- X }
- X k++;
- X }
- X }
- X if (!found && c) {
- X fprintf(stderr, "Table problem - found %d character (width %2x)\n",
- X i, c);
- X }
- X }
- X switch(dotab) {
- X case 0:
- X for (i = 0; ct[i].ch_name; i++)
- X if (ct[i].ch_name[0] && !ct[i].ch_info) {
- X fprintf(stderr, "Table problem - no width for '%s' (%d)",
- X ct[i].ch_name, i);
- X fprintf(stderr, ", wididx: %d, catidx: %d\n",
- X ct[i].ch_wididx, ct[i].ch_catidx);
- X }
- X break;
- X case 1:
- X if (k % NUMPER != 0)
- X putchar('\n');
- X break;
- X case 2:
- X putchar('\n');
- X break;
- X }
- X exit(0);
- X}
- X
- Xchar *normch[] = {
- X"a","b","c","d","e","f","g","h","i","j","k","l","m","n","o",
- X"p","q","r","s","t","u","v","w","x","y","z",
- X"A","B","C","D","E","F","G","H","I","J","K","L","M","N","O",
- X"P","Q","R","S","T","U","V","W","X","Y","Z",
- X"1","2","3","4","5","6","7","8","9","0",
- X"!","$","%","&","(",")","`","'","*","+","\\-",
- X".",",","/",":",";","=","?","[","]","|",
- X"\\(bu","\\(sq","\\(em","\\(hy","\\(ru","\\(14","\\(12","\\(34","\\(fi",
- X"\\(fl","\\(ff","\\(Fi","\\(Fl","\\(de","\\(fm","\\(dg","\\(ct","\\(rg",
- X"\\(co","\\(tm",
- XNULL
- X};
- X
- Xchar *symch[] = {
- X"\"", "\\(aa", "\\e", "^", "\\(ul", "\\(ga", "~", "\\(sl", "<",
- X">", "{", "}", "#", "@", "\\(pl", "\\(mi", "\\(eq", "\\(**",
- X
- X"\\(*a", "\\(*b", "\\(*g", "\\(*d", "\\(*e", "\\(*z", "\\(*y", "\\(*h",
- X"\\(*i", "\\(*k", "\\(*l", "\\(*m", "\\(*n", "\\(*c", "\\(*o", "\\(*p",
- X"\\(*r", "\\(*s", "\\(ts", "\\(*t", "\\(*u", "\\(*f", "\\(*x", "\\(*q",
- X"\\(*w",
- X
- X"\\(*G", "\\(*D", "\\(*H", "\\(*L", "\\(*C", "\\(*P", "\\(*S", "\\(*U",
- X"\\(*F", "\\(*Q", "\\(*W",
- X
- X"\\(sr", "\\(rn", "\\(>=", "\\(<=", "\\(==", "\\(ap", "\\(~=", "\\(!=",
- X"\\(->", "\\(<-", "\\(ua", "\\(da", "\\(mu", "\\(di", "\\(+-", "\\(cu",
- X"\\(ca", "\\(sb", "\\(sp", "\\(ib", "\\(ip", "\\(if", "\\(pd",
- X
- X"\\(sc", "\\(gr", "\\(no", "\\(is", "\\(pt", "\\(es", "\\(mo",
- X"\\(dd", "\\(rh", "\\(lh", "\\(or", "\\(ci", "\\(lt", "\\(lb",
- X"\\(rt", "\\(rb", "\\(lk", "\\(rk", "\\(bv", "\\(lf", "\\(rf",
- X"\\(lc", "\\(rc", "\\(br",
- XNULL
- X};
- X
- Xchar *names[] = {"Times Roman",
- X "Times Italic",
- X "Times Bold",
- X "Special Mathmatics font"
- X};
- X
- Xdumpexamples() {
- X register int i;
- X register char **p;
- X printf(".sp 1i\n");
- X printf(".ps 12\n");
- X printf(".vs 14p\n");
- X for (i = 0; i < 3; i++) {
- X printf(".ft %d\n", i+1);
- X printf(".sp\n");
- X printf("%s\n", names[i]);
- X printf(".sp\n");
- X for (p = normch; *p; p++)
- X if (strlen(*p) == 1) {
- X if (isalnum(**p))
- X putchar(**p);
- X else
- X printf("%c\\^", **p);
- X if (**p == 'z' || **p == 'Z' || **p == '0' || **p == '|') {
- X printf("\n.br\n");
- X }
- X } else {
- X printf("%s\\h'.25m'", *p);
- X if (strcmp(*p, "\\(tm") == 0)
- X printf("\n.br\n");
- X }
- X }
- X printf(".sp\n");
- X printf("%s\n", names[3]);
- X printf(".sp\n");
- X for (p = symch; *p; p++) {
- X printf("%s\\h'.25m'", *p);
- X if (strcmp(*p, "\\(**") == 0 ||
- X strcmp(*p, "\\(*w") == 0 ||
- X strcmp(*p, "\\(*W") == 0 ||
- X strcmp(*p, "\\(pd") == 0)
- X printf("\n.br\n");
- X }
- X printf("\n");
- X}
- X
- Xguess() {
- X char buffer[2048];
- X int filesize, errcnt, i, g;
- X filesize = fread(buffer, sizeof(char), sizeof(buffer), stdin);
- X for(g = 0; g <= filesize - 224; g++) {
- X errcnt = 0;
- X for (i = 0; tabN[i].ch_name; i++) {
- X if (tabN[i].ch_wididx == -1)
- X continue;
- X if (tabN[i].ch_name[0] && !buffer[g+tabN[i].ch_wididx]) {
- X if (verbose) {
- X printf("Table problem - no width for '%s' (%d)",
- X tabN[i].ch_name, i);
- X printf(", wididx: %d, catidx: %d\n",
- X tabN[i].ch_wididx, tabN[i].ch_catidx);
- X }
- X errcnt++;
- X }
- X }
- X if (verbose)
- X printf("Guess: %d, errcnt %d\n", g, errcnt);
- X if (errcnt)
- X continue;
- X printf("Guess %d\n", g);
- X }
- X}
- END_OF_FILE
- if test 7283 -ne `wc -c <'utils/dumpft.c'`; then
- echo shar: \"'utils/dumpft.c'\" unpacked with wrong size!
- fi
- # end of 'utils/dumpft.c'
- fi
- if test -f 'utils/fonts/cmbx10.pk.UU' -a "${1}" != "-c" ; then
- echo shar: Will not clobber existing file \"'utils/fonts/cmbx10.pk.UU'\"
- else
- echo shar: Extracting \"'utils/fonts/cmbx10.pk.UU'\" \(7576 characters\)
- sed "s/^X//" >'utils/fonts/cmbx10.pk.UU' <<'END_OF_FILE'
- Xtable
- X !"#$%&'()*+,-./0123456789:;<=>?
- X@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
- Xbegin 644 utils/fonts/cmbx10.pk
- XM]UD11T9T;U!+(#$N,B!O=71P=70`H```&O(B5@`$)JX`!":NP#5!#>DZ)!\<
- XM_AO1\][B7<]]J=GR%MCR-M8D?5)6U#5]/R=M(I;1U-#6SRMK\M!I/0>"TF3Z
- XM?1#(+D(-%KTB'!S^&]A]N&EG:F9K5N1K96M6:E=H:-:6I7:U9K96Q5Y&QO1K
- XM96ERVTV6P#A##4GP(AL<_1NX<8T#-G=U7%1=%#73,EU#)=4A;5(5UHY]E=8A
- XM;5(EU2)=0D73)5T2=<*7<\T=.(#(,$0.'&TE'QS^&]BMNVEY:VAM!7;09FT5
- XM9M%E]M)5YVTFXD;25?;15FT%=K:&EUVWV*#(-D4,%KT?&QS^&_VW:5=K-VPG
- XM]L-N)E)B9E+19#T?T-%D/1]E+1]E*"1M$_1M$E]M`U;$5J4OW"#(*48+D^4>
- XM&1S^&_VU:55K-6PE]L-&T"]&4F+T92QD//T,9#SC92SE;2_3D,`^1PYW<R8@
- XM'/T;R('-$SIWB&QG731EU$5M4U76-&UR1=@CY6W?:](5U&1M-E7396TF9=)G
- XM71:&QJ=XS1)-*6(PR!=(#F9B)2`<_AO]%-'I1L:/VXZVQD_131"X#4D&^DX2
- XM$!S_&]3LM674P!M*"8+5&10<_QM?TNU+92=D1F/V5C955%5S1:B`R$=+#FP2
- XM)2`<_AO]%[1M$Y;0.FP[:RT&HM%H/29STV8]1E/59$U6-M1B?4D6TX)])T;2
- XM9FT69]!G;0:&QI:VEZ:FIK:6MT_131#('4P+$0T=&!S^&_T\[1;5XFPO1K-&
- XMLE:C5I16=A_:$,A`31%W<BTH'/X;K7V-6T?5>.(A73(5CR)=$B6/(UPC6/)%
- XMHD6.(E6"58\F5B98\G5"=8\H4BA8XBEY6/*EI4^G-]#(4DX.9F(E(!S^&_NZ
- XM2-$HG0*"%\*")[*"-K*"1J*"5I*"5X*"9W*"=V*"AF*"EE*"ET*"IS*"MR*"
- XMQB*"T&$H+0F"T8@M)X+3:"U%CRU42M(TK3)`P#9/#=)X)!T<_1NIU%5=!)2E
- XMM7705DTD5=)3;28O744>=M1A744O;28UTE1M!E705UM:24T%5=2:R"%0#)/E
- XM(1L<_AO8;:AH=FI6:U7D:V]&M5:E9H9]6>IM3]'0P$91#=)X)!TD_1NIU%5=
- XM!)2EM7]=!5724VTF+UU%'G;4;Q744FTF-=)45C955!,C5U(5(5I!%ET&1=2W
- XM'6)QUC4OUJ_7C9;;0\@T4@W,R"0A'/X;U]#:T6AM!J7&M;Y&MJ:UMJ7&A='3
- XMU&==)H71:&T.5I;/:68D:F73=4(=&8+`-U,*..`;%!S]&UA13!,T=B2D(\,4
- XMPQ]-`A72?0NM%]%M)]%]&JTFTETV_1;1,3T#%+,FA",<05A@P!]4#,S((1P<
- XM_AL?W21F9"-V<R*&@A.&A>.6DNTK;3_54,@?50XGSB4@'/X;_1BNU4;3*5TR
- XME=(K70/%L]%G33T=B;#(.E8-Z3HD(1S_&_T9I&U"GVTBI]`[;0+'L]!K+1>B
- XMTO:2U/9RU74]9E+7<SV&,MER+:]A+<XGWO4!#ST@R%I7$P6J,2X<_QO]$]%:
- XM1K;0*&M\*'MK.6MK*FJ**_:8DL=R)G/09R)G+19C)V+1=21E/2921E+39#1T
- XM+4]C)F,M5Q*&$]9A*&$M>8G7BHV/>GVO7%VTT4W//1/0P$)8#>DZ)"$<_QL?
- XMT4QWLM%Y/2=SU&<M5U+7<SV&(]EQ+;C=]]Y]Y]R-NMHB?8)&US1]4V?4*&TR
- XME]$Z?0+'LM!U_&T@R"]9#>DZ)"$<_QO]&:1](Y?1*WP[?"T'HM)X/2>"U'8M
- XM9T/6="V'(]FMJ=R-WI;:_1G`.%H+/I`=%QS]&Q_8)H8TES.F/SID*F4I=2EM
- XM-M-]-M/VTVTW@F:25J)'HD:C-K,VHS:S)Z0FEA_9$,`I80CQPQ<5$O\12;-4
- XMA55E9&5E8W737)AB5E551U174^)85$<11502='1@R"9B"CC@&Q<=_QSXU>A=
- XM52>81':#991?6D3E6E\UI$645H-D$E1S1G#0(&,(+8`5$1+^$6AS4U-5-%4D
- XM921S+E74U*(DDC."4U.'0,`D9`HXX!L7'?X<SXU>A:8E=%=CAE253TI3Y5I4
- XM]*54E6.&=$MG*,`B90AN[183$O\1=Y138X-$DR2C)*GZW^+2326R)+(TDE1C
- XMEU#0&V8%GT@/$AT`')>4,W0U5$5%14537D6?V>U:_%#`-&<),S`8%1O_$6<T
- XM4U0C-%0C,W,B/C1T<W.$5)-3DA>QU_+6T(TGTEU"2JXM!!/0,DM$1TBUR!QH
- XM"CC@&Q@=_QSXUNA=94:5(C2%$61_9U;J6%/[*Y`2:04<<`X+'O\=-&XV9-SX
- XM;J-3K,`;:@6?2`\.)@,=E)XVE`3OCM25$UI*1!4T,T-F4,@L:PFV"!D6'?\<
- XM^-3H74]4E%8X53E4*U,L43T*R[84M26E-95$E46%575E/Z.0R`UL!1QP#@L=
- XM_QSX;MM3V=@@;0]54"@E$O\1A&=F@B-$(TA1%D(61_9V=6ZEA84_LK*PV!AN
- XM"CC@&Q@2_Q&$9H(C2%$61_9U;J6%/[*PT!]O"3,P&!42_Q%WM%1SDU24/TM!
- XMY5M?%+0TE%1T=%2W<,@G<`HXX!L7&O\1@G:T1V=&64595%I$Y5I36D195%E%
- XM9T9U1U)JY5TOO,`I<0FV"!D6&OX19E)T0B-D9E2%185$E3Y5E4251854A6-V
- XM<U>6)=3E71^PV!=R!Y/H%!$2_Q%S4G(3-.)!$U-5-.E9_%#0(','0?L3#A+^
- XM$3<2,E0B@A\X(4J6I+6FF7^6AH(54B(F0,`9=`<GT!,.&O\9;C*_.O2-WH-9
- XMXU0D1!9")V+8%G4*..`;&!+_$?A8;K6%979T=H1"&'8XR")V";8(&182_Q'Z
- XM5S629G-U<H9BGU4K]3+0]1+1C2]M3TUBH,@W=PU)\"(?$O\1^3DW\U97)F56
- XM-U5E*%0A12E3(40J4C%3*F$C0CM1(U$L=4$M#V5M%7721TT_.3C()W@)M@@9
- XM%A+_$?HY-F*54Z4SQ1/1?2;47573?1,5PR6S1:)E@H4_A9#(,GD)M@@9%AK_
- XM$?I7-9)F<W5RAF*?52OU,M!1/042TGTO;4]-;RUCLU*U0K4RQ2+1,BTUTL`I
- XM>@@M@!41$O\1+2)%4R9C)E,F5"5D)5M;:FM5)%8C9B-6,E<B9C)60=,0R!L`
- XM"Q$-'1@<_AO]I6A5:C5K)?:SXD;"[21M'].`L$(!#U50*",<_AO$/3]='WSY
- XMSB%LTB?+,WRB1\DU?()GQRA\4Y?$*GPSM\(L!\$L)\`L-K+$>3Q7@L9W/'=M
- XM%=,_U1UPP#H"#D^@)1X<_1NXUD9-%*2EQ7]=%5734_;38EU5%D)B3.1*3$)B
- XM3-5O%=52;38UTU7UT5=<6DI-%&35JL`R`PSCBB$<'/X;T"W.)-KB;8^-:M7R
- XM)M0C?3\D;2)7T29M`V?/*&LI>O*FDK>"QG/'/Y712!D$#$1`(!L<_AO4XV(F
- XMLE@E7D7%4E@H;C)BU,@1!0YF8B4@'/X;`S[:1L9/T4T0R#XGP(AL<_1O]
- XMTGQC?00XT#2-`T?0-7T"9\)HLGC7?8?8]]A=H]H[*CPI+1*"T3<M(U/2-3TD
- XM0]%CVRW!W1#`(P<.3Z`E'AS]&S;&6*@[:QT%U!='%W4E<J0DUZV/C:[2;5_5
- XM8,`Q"`U)\"(;'/T;7]72XVU;T%&X4V)55&-3]59%'C961O%59%-48U538EA1
- XMO0O6XVTOU4#`+`D.3Z`E'AS]&V_5U>-L=65^<F1D951D5F-C9U-C65)B6T)B
- XM30T]2MGC;5_58-`^"@U)\"(='/X;J0$T=,2TE-1UU5;610$5/D8!%C]0$51M
- XM95U7]-24M+.S8D.S1%*R4A)1L5(B4I)2+YF3^)@@T",P"3,P&!,;_AIGI#1S
- XM<U1T0Y,^))0>M97Q24,Y-$=%-S=#2G;`$S$),S`8$1O]&I+02G:V0ESM97_3
- XMP#(R"3,P&!,;_AI8G&-7-'86=19\^%%)70;]!=!=!=%-$](](](H)BDE*B0;
- XM,](],M0?U1#`,#,),S`8$QO^&F><9%54935U)F4E=3.%T/70312WU$TUTO71
- XM8BEA2,]\=21U-&5LF`+C0),S`8%1O_&M(M4]1--=)M%]`A7")<$ULC6B19
- XM)5@F5R=6*%4I5"I4`=Y<6_T0P"LU"3,P&!,;_AHRHET&Q[BI?.,M0B:44W)U
- XM493271XF%(OXN%%)4BE4-E;)=\`T-@DS,!@3&_X:EJJ$8F1D1&4T=32#/TT5
- XMT5-6420T419":#)H0>-97Q25%)0TA#1T5%2*IV#`)S<),S`8$QS]&Q+4_5'4
- XM+],CLC*R0J)2DM/RTRT_/232/2XTT>5=(Z#0,C@),S`8$QO^&F>L8W1"HT*S
- XM([,DHR:#*%,Y0EH2>YN<4QI#221LFJGBM!2C))-%9%RG8,`T.0DS,!@3&_X:
- XM9ZMT5%1T-(0TE!]90>-944AB.&)&$50T(593717]%#.%)70U<T1T4U2*IX#`
- XM0B0),S`8$2']'H\L>+5"(C,T)"(E)"$U(W]2*4(J,C,7$HI\;&QL>I(6(5(E
- XM$T(Y\R1T)%8D(B4C,C0C)#,A1:EM'R?`428.3Z`E(!W^'*3=,RVC4=E%+8-B
- XMUT8M=5+75"V%0=E3':4AW&N67)9=(J;0+%PL>RL2:2HR:"HT9RE%92I&8RI6
- XM<2M7C&=Y(EEH(F:D-<.X>730(3\(L%@7$!W]'$AB9#*$%'KV43=:6TL\/#WR
- XMWD($]+XVM'#0(3X(L%@7$!W]%%2^-K0$_D+3WRT\/$M+5S'U:G04@C-C64#8
- XM#1`%''`."Q+_$?ANU3`8P!81!9](#PX:`Q%OCM25$UI*1!4T,T-F4-`X&0F.
- XM-AD6'?\<A]-3E55T=&XU=55T961U5%@T>&.%<W6#9815A4643E65-3)$120T
- XM120D*#(D.$50T#4:#4GP(A\2_Q%)9X-5%$-55W-%9G0U99-#=93]64@!E&-0
- XM$590$%==64WUE:>'@B9$)%-9AT#`-1L.3Z`E(A+_$7>'E%0T0V.3$W-$EW0D
- XMM9,DM9G[69O:XK712UT5EZ(DEZ(T=!2"5%0T4Y>70,`^'`DS,!@5&O\5U1UA
- XMUBUAMQ&45'1T5'$4-($D)'$T%6(Z84KU%:06HR910Q="0AA#01=%2#=%21%[
- XM'6+6'6'5P%8=$*JE*R<<_AN_W-0B9UTR-I/3(VHM(S:CT21J/1)&LM`E:RT"
- XM5E)"SR9E+4-F4M0G9#U-G3VM,H9#TCAE)B]REE)B8J924G*FPF\K:S4[:D4L
- XM:%+Z79+`8AX2M@4Q*QS\&[`0M&V92FE82VLW3&PF7&PT70;#/VT&@C(UTE@C
- XM(FTE<W;25D?VTM)VTE9';25S=M)8)VTE@E(6T5@E(6T&T3%M!M$C70;1)%QM
- XM`T:VT#5;;$=9:EI&VM`!$M!8'PY/H"4>(/T=`;$!X@$84=1D$<2DI<5UUF31
- XM)%71)3;!-B7!526R51:Q;*%\DGR1C(&<<IQQK&&V%5*U)5'%)C'&-2'55"'4
- XM9M5UQ:2DP11DT4H!`@'A`;"P$R$%F9@/!AW\'!0=CG%#XRST',%!L!,\!9F8
- XM#P8=_!04',%,_C(^=!V!0<`Q(P]54"@A)?T<TN(W/6XS<];C-SUC<X`U$!.S
- XM<];D-SUC<\!5@W/6XS<];C-SUN(W/2#`<B4/55`H(2']'E35)R0M(V-2T$4V
- XM258W$I$V1RHW1RE'1RA(1R@Y1R<Z1R9*1R5,-Q8]`V)3TC4533)!5-9&-TU3
- XM8D'3134=(U-BT#8W'$5'*D9'*C='*3A'*$A')TE')SI')CPW%DPV)CT346/3
- XM)!@M5$#`%2<%''`-!P[]'!0O8=$4$?8?45\4)!70)B@')]`3"RG\'J&1@H."
- XM@H-_-T?S?B1E;H1U?B2/.$CSDY*BDY*QL=@F*0<GT!,+*?T>&QLI.2HI.?.$
- XMCSCB1UZ'1EXF1_-T?S<X*"@X*!D:T"HJ"3,P&!$2_1YSU=.!4U$4,SDC*Q,6
- XM)1$5?W=1$5)A,;(RDS-!%348/5TWT!$K#D^@)1X?_1D!#M/07.T!`]#`%2P%
- XM''`-!P[]!10O8=$4$?8?45\4)!7`#"X%''`-!@;]!10=L4'0*B\),S`8$2G]
- XM'@$2\!`^+3WSWB/>(]\]XCWB/>(]\]XCWB/?/>(]\P$"`1"P$#H%''`-!A+]
- XM$10<P4VD',%!L!@[!1QP#08:_1$4',%-HR4<85]1XD%!04%`>`T]#D^@)1X-
- XM_1"T&5![T;!,0`Y/H"4>'?T<N,<X/"+"*RQ"DL8G+()2AH)!<T*!,E1Q<B)4
- XM=3(?)4A43D185$]4A4(25'5!(E1U,C%S0A0Q0H8V8M$M$M$L9(.GP;BX#%L%
- XM''`-!RG\'LSM9,FX#%T%''`-!RG_'LGM9,S`%6`%''`-!P[^'%%"3Q7Q7Q81
- XM0='Q8D'0$!(),S`8"0C\'!15-S9&551RT!$3"3,P&`H(]AQ$54<V-C548H#8
- XM$10),S`8#`;Z&AD1-3%14W<Z%M@3%0DS,!@-"/L<XAL1&1(G(R4E=U2X"18)
- XM,S`8$0+]&-;@$!<-Z3HD"0?S'#XQL'@\&QCXT!`8""V`%0T(^_]%AJ6?5U*B
- XM',`,(`4<<`T,!``/A$U#2-`47@DS,!@-!_L<8;.5<Q-$-!-S$9$0P`Q?!1QP
- XM#08&_1T4';%!T!5]"3,P&`T)^AT34QXU.4034R)B07$PT`]^"3,P&`\$_!PT
- XM<2PL(70PT!-_"3,P&`\&_!TC4S4U'V-A4U,U,M`E"PJ[N!P?'0`<J3>59C-T
- XMA355=45%A45%A5->186?`<GM6%KZ2U#`'PP*..`;&1T`'*C15BM(.5=7]85U
- XMDXXUT_V7[06%3Z2@T!H-"CC@&QD=`!RLI564=85U?F6%/P&'[5A4^RNP*`X/
- XM55`H)AT`'*A8PE9V*TA8.5=G5_6%A76%DXXUA<3]=^P5A85/I)2@T"$/#U50
- XM*"8=`!RI3*5G592%=85V=7YEA84_`E?M6%A4^RLKT!\B":3X&1$._AP49"]D
- XM8?<W%!%$$?89'U&17QD4*"09%:@)+08B(!`+!/\*T=`?7`FD^!D1#OL<49%"
- XM@D\9%?&17QD6$4010?<W\61B1D'("7L),S`8%P$`"]JH"7P29F`P+P$`"]3P
- XM#VED96YT:69I97(@0TU"6/`58V]D:6YG<V-H96UE(%1E6"!T97AT\`QF;VYT
- X09F%C96)Y=&7T`.H``/7V]O`5
- X`
- Xend
- END_OF_FILE
- if test 7576 -ne `wc -c <'utils/fonts/cmbx10.pk.UU'`; then
- echo shar: \"'utils/fonts/cmbx10.pk.UU'\" unpacked with wrong size!
- fi
- # end of 'utils/fonts/cmbx10.pk.UU'
- fi
- if test -f 'utils/fonts/cmr10.pk.UU' -a "${1}" != "-c" ; then
- echo shar: Will not clobber existing file \"'utils/fonts/cmr10.pk.UU'\"
- else
- echo shar: Extracting \"'utils/fonts/cmr10.pk.UU'\" \(7517 characters\)
- sed "s/^X//" >'utils/fonts/cmr10.pk.UU' <<'END_OF_FILE'
- Xtable
- X !"#$%&'()*+,-./0123456789:;<=>?
- X@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
- Xbegin 644 utils/fonts/cmr10.pk
- XM]UD11T9T;U!+(#$N,R!O=71P=70`H```2_%@>0`$)JX`!":NP#)!#``"'QP=
- XM_QS0XBW.)-KB$4V.(336XA5-3Q=-(G71&4T='0*5SQM+*UKQT$DM!73%27S(
- XM,4(+55@=&!S^&]6DA(2C=*1DLVXTM%2S9*1DE'1UC2E)1TI&2T5,->1,3T2T
- XM5*1DE#UEP#I#"XX['AD>_ARV<8-B0G*B(E/01#TC,],S/4(CU2\4UA$]=>?9
- XM/7'Q36$CUA\SU!4](7/0&BL<-RTW<,@S1`PXYB`;'/X;U=!(2TI)3#CTT#=-
- XM$V311?32->=-)/1-(U3114T39-!&30-TPX2SE)-]6=@W10KCD!P8'/X;`89*
- XM1DPF]-%DTE]`$!5&%Q7B1AU%+;U%+>)&'488%$`1'B1`$!7TTE3"9*0@&"#8
- XM*$8*<<H;%AS^&P%U245+)?3!5,+T311&%AXD1AM%*[M%*^-&&^9`%%W9P$%'
- XM#(X[(1P>_ARV<;-B0J*B(H/01STC8],V/4)3U23TUA0]<3Y4VTS3TU0]1$]-
- XM-%/31O/21ST4@\$3HJ$RLV)1T6O($T@,``(?&AS^&\+.M$I(U8[$I$PLR`Q)
- XM!<<=#PP<_QO.W$1,T!I*"#CE%1`=_QL]A<X!1$-4/B5$-$118W%#E8#(1DL,
- XM<<H@'!S^&\:53$A,*DP;2QQ*'021T4@=)''31AU$4=5$/40UTT(1330A)-)!
- XM$TTE5-'T=-!(3$A;24OTI*2TE+6$MCQ;R!U,"@`"&A4<_AO0Q=/M)-3B3!]$
- XMLD2Q5*)4DU1U'7'(/4T.JJTF(1S^&YTI]%TECB$4T!%(\22Q)(XA-)$TCB%$
- XM<42.(5115(XA9#%DCQ=!%TCB&$A(&2E'."E$E27`R$9.#``"'QH<_AN)E%LW
- XM7!@12QCQ)*&!-)&!-8&!1(&/%4<8%D88\711@81!@84Q@90QCQI"&!M!&/'%
- XMCQT$@=$X'2)ST22<%,`[3PQQRB`;'OX<I]4U/1.3L[.3T#<](U321#U#/TU$
- XM(]8QYTUD$]8R]-1#/4-$TD4](W/0.3L[.3T34]5ZR")0"N.0'!<<_AO4I(.$
- XME&2D5+->1+1$LU2D5)1D@XT*ZTTLL,!040QQRB`;)?X<I]4U/1.3L[.3T#<]
- XM(U321#U#/TU$(]8QYTUD$]8R]-1#/4-$8V1343%3<S%1,Y,A81.S$6311#<:
- XMEQU"<=4E+5,S_5C7;90PR#A2"\<>'QP=_AO3TT=-!)2TI*2SKC2TE+.DI*24
- XMM'30S31DT4@]!(3.5)2_24842C842D01QS0=E2#`.%,(XY`7$A[^'%910U(B
- XM,I$2(Z,BPA/"'B/0$4T5T5T)JXR+J=!=%=%-).+17]`A.R(A&A,B)B05=<`@
- XM5`N..QX;'/\;'<(X1S(I2"+QI)$2I*+BM*'M/$V6T]-0R!]5#``"'QH=_AO%
- XME$PW[630&3P:2QLZ'0*AT2@=,T+66L@U5@P``A\<'?\;N8-=%&32)TTAA=`I
- XM]-`;XDL=#TD=%8'2]''352U/11UN)#'8]!'9;:]-SB+0R$A7$''**R@=_QNU
- XMM8-;6D5,3"?B2UL92EH:])$DD;2!)('/1Q1''%841QT.)%%D4=+B0QA#'40A
- XMA1'5]!&D$=9:77XDQ-CB+1*PP$18#``"'QP<_QL;2F:%I*+022T%@=)''352
- XMU$4=9#'742V$$=I-M=M-OUV1)-<376%$U15=,F72&$T1E<*DP<2BQ76G.FS(
- XM,ED,``(?'AP`&\F4712$TAI=`K30'%L=%:'221TU@=1''552UD4=A#'94AVD
- XM$=MMSJ39R<`X6@G''AD4'/X;'6%943M"\K0QM$&E0:11E---)-)=)-+TTDTE
- XMTDD?5*%$L36B-+$TP32R)+,5E1UAP"IA"``"%1(2_A$WHE-T4V1C8G/2\[>$
- XM,V-C4W-2@TXC@S$2=#$B42,11D,@R"EB"..0%Q,=_QQM/I/3,U@Q)"=')CDE
- XM.30Z).4Z,SHD.30Y)4<F(A4G%%;0'V,''',2#A+^$59R0E)$,E0C8C*^4\+#
- XMD2*1,G%20G5`P"ED"..0%Q,=_ARFT^DY4C<E$38G12DT.30J,^4Z-"HT.34I
- XM-B=')"$X4V#0(64''',2#Q+_$66"0F)B0H(C@Q*EH!;CTM.A(J$R@5)2A4#`
- XM&&8$XY`-#QT`'(62,F,T4D1#4EY3BX[2.:3`-F<(``(5$AS_$M$W0Q(D)#,C
- XM-#,4)B?C-C<F*#0Y)"D22QTRU"TZC071,J,BQ>+1(2PC*B4V.(7(&V@(XY`7
- XM%!W_'&U.D]0S63(4-S$6)T<V[#@SDI"0$6D$<<@,"1W_'#)O1BV6;J4SD(`8
- XM:@3CD`T+)0,<@H](+9?IJ#$E="%#,B0D5,@P:PAQRA83'?\<;3Z3TS2$-D8V
- XM*#89-1HT&S,<,CLQ2T(Z,TDT.31(-3@V-S9&-E*2@,@,;`1QR`P)'?\<9NW3
- XM.=@?;0U56"0A$O\18V9I,A4S%3<Q%R(7)TA(-NPY.3.3DY#8%VX(XY`7%!+_
- XM$6-9,A0W,18G1S;L.#.2D-`B;P@``A42$O\19J-#<H)2HC.C(L(>4\,2PB.C
- XM,J)2@G-#IF#8)W`(XY`7$QK_$6-8,20G1R8Y)3DT.B3E.C\SDT.25')C$5)S
- XM)9YCV:#0*7$(<<@6$QK^$611<D(B8G$24H1/.3/E.C0J-#DU*$8G1R0A.%,P
- XM$N8]D-@5<@9$1A`-$O\18C4Q$B3T)#-"3K-Z,-`B<P9/IA`-$O\1-B$R4R&"
- XM'RD1.!%9AI:):4I/E8$2$5(A-C#0&70&..40#!K_&5XQKRDX1K3H.>0U%"44
- XM,Q="V!9U"..0%Q02_Q%E9NPX-C=')T<T(3E38,@@=@AQRA83$O\1A6)(-?.1
- XM?S<9XC4;\S'$$M#S$=+B/4&0R#EW"XX['AL2_Q&"@G)&1C4W-R4W-Q8V$2<7
- XM\U$348-!,E&?,Q,S&C(5(QOS$5,1Q'(1T/-ST2DM(9&`P"QX"''*%A42`!$8
- XM.%1CA&*C8<-!T3(=(Q+335/53373$CT10\%3LF.A@W1E.$G(+'D(<<H6$QK_
- XM$85B2#7SD7\W&>(U&_,QQ!+0\Q'2XCU/'4\:1!I#&T(L(BT4T-`H>@<<<Q(.
- XM$O\1'1-C(G,A<S%D,6-!4Z2CHZ110V$S<21B(W$C@2-C'1#(&P`*``(:%1S^
- XM&]=4A%2B7TL52RXD3![31-1<T(#`1`$-55@C'AW^'-'RWO3<;;$4VA)=D338
- XM%%UQ5-8675%TU!A=,932&ET1M-`<7!T$L=%:'221TU@=1''55AUD7QV$/?$"
- XM\,!&`@QQRB`;'OX<I]4U/1.3L[.3T#<](U321#U#/TU$(]8Q36@QL3CB/0.#
- XM&Q./UD$]8R]-1#/4-$TD4](W/0.3L[.3T34]5Z#`,0,+'',=&AW_',XBVN)-
- XMAM?Q%-8275\334(UT_%4TB5='B%TT.(92^(;21T$@L1TICE<F!H$"JJM'!<<
- XM_AO<XZL=_QHQCBI8\:,0)N,:O<#(#P4,``(?&AS^&]WMQ$I$PL#(008+CCL>
- XM&1S^&]LDT5)=(S72)$TQ1=(D72%4TA5=$678387839]-DMH=H=H=(7'3%AU!
- XM8=,E'4)!U"0=0S'34MH=L<`H!PQQRB`;'?X<-;58ASII(E-40A)S,W.3(X*3
- XM(I&R$]AMA=KM--EM31;`.@@+CCL>&1S^&VT=)M?B35G1,D$Z-$,W-40U-D4S
- XM1D5!Y4=&049%0S9%-35$-S1#.C)!/1G6XDUVTM%0P#()#''*(!L<_AM]'4;9
- XMXDM71E\D9%1>9%1$<U1$?T1#231#.S-"3#)"/1,7U7V>)-EM31;`/`H+CCL>
- XM&1W^')?214LY.#T#5-!$/2,TTD(]0QY$U$$]0R]-)#/2-?/0-SLY\K)14I)2
- XM]AD6$14G)1+BAX'0)#`(``(5$!W^&V2B0G)B7R@C.#+RHA[#H_$J(C@S\H)2
- XM8G)"EE#0$C$(``(5#1S\&V*C=E(SK@%SE4W0+S((``(5$!S^&U624F,:(Q
- XMHQ2)>?@Q.3Q/P\\\/#TM+2TM*!0I$RH3&A/2`0$!$=`P,P@``A40'?X;5H)2
- XM;Q@S1D)',D9#-DSSTM+2I@$2`1\P$#WT$XGB>(,ADTE*64,`N-`@``A42
- XM'/\;SRTCT?30$3PA/!([$SHC.A0Y%3@E.!8W%S8G-A@U&30I--7FL[O0+C4(
- XM``(5$!W^&R*"2UIHCE$!$35Q(4)A$6)2<T&3T]XD$ICBA;,AE"&307-B0Y5@
- XMT#<V"``"%1`=_AN$HD)R86)C0F0R=#*"/STM,U4R%"0Q%B-((D@Q.B'D.C\2
- XMHQ.2,H,R@E)B<D*E4,`G-P@``A41'?X;$=/3\=(AP2\<$QL=+QTATBTATO+1
- XM/1\M'C/0Y4T2D-`T.`@``A40'?X;99)"<8%1DD&B+B*B(Y(D<D515Q)XIYAB
- XM-D)6(H0BEK7CPA*Q(J%"@E-1EE#0-SD(``(5$!W^&V2B0G)B4H(S@C*3'SHA
- XMY#HQ*C$X0BA#)A$T)!(U4S_2TS*"-'(T8D-Q87)B0J5PT$8D"``"%1`A_AZ/
- XM'&@C$B4D%!,E%1(6%C847V$V84(3471!AA&8F8F8H161,Y%#$E%']!55%3<5
- XM$A85$A84%!43%B,2&6WQ<,!.)@QQRB`;'_X=@]HB'8\D'6XS0=;S,=<R'8,1
- XMVDB6.TD\*CP:$3L9$CH9%#@9)#@8\F-A@W-!DW0QDX,AHY2DHZ$3E($R@2-Q
- XM0E)#0G6%0-`?/P>..Q0/'?X<1V)C,9,3E^*#PL.RPL+1TMY1!:+/3"?0(3X'
- XMCCL4#QW^%&+/3"!;\=XQTM'2PL.SL\XCAY,2H3)R9T#(#!`$<<@,"1+_$6;M
- XM(SG`%!$$XY`-"QH#$4?M:#$E="%#,B0D5-`U&0@``Q42'?\<=J-#<V-B@EXS
- XM@T-S4W)C4T8DDU*#8G-R8X)?.#3E.3,Y)#(S-#(S)3(R(V-4T#8:"XX['AH2
- XM_A$W=5-3,E(T4Q)R)&2",G22^SHG`51#,!`V/3<]*#PX//.$H1-B(H$S0D-"
- XM5H5`T#8;#''*(!T2_Q%EE8)24E)2<C)R,I(2@B.5DA*SI;.EL!3CL]*STY6A
- XM(I(2H3)R,H%24E-"A95`P#T<"``"%1(:_Q73'3'3+3&6$8-#<G-2@1(S<2,B
- XM<C(3<4;V%6]19D%S$C)R(R%S,A&"4W)S0X$6D=,M,=,=,,!,'0YQRB4B'/\;
- XMG:TA%832$DHM'Q-+'1$TLLXA1,&^(51ATQ9&'3%D4M+6TA=%+2%T8=$81AT?
- XM&$86'B893!8:3!8:2R4J2B5)2$*4UB#`:!X0..8J)1[]'*8!`UUH.$I'.4PF
- XM.ST!4\/0%$P]`C/0/1$DT#T1)-`Y%!(]$Y%DT3D631."9-$W-DT=!DT3<V31
- XM.";TT3D730.14130/2$4T#T1/TP]$42ST"4[/0)CE,*#A*2C76QM@-!3'PQQ
- XMRB`;(/X=`9'74K-3,:.4H[.3TW/1$U/2(T/1,S3!1"/14R/!8Q]+%XH8CY&8
- XM@:CW&T$V'#(U'3)$'$,S'30R+34Q'3<].3LZ23H3-3LE?1`9P!$A!''(#`0>
- XM_!T2'?[!+9(8$A#`$3P$<<@,!![\%!(8$MGL(=\2$+`\(PU56",>)?X<PN(G
- XM+&-CQN(G+&-CQN,G+&-CC0'2XJ)RQC8\;C)RK2'0@V/&XB<L8V/&XB<L8V/&
- XMXB<L(,!O)0U56",>(?X>1-,G(QT38E*S8V.$8G$K8X&2<X<X%S@X%RDX%C
- XMDX%BHX%3LG%3PV%2T245/2(Q4]1&)DU#4C'2-24=$E-APU)QLU.!HF.!DV.!
- XMDG.!@W.!<X.!<I.!8Z)Q8[-A8M`E%CT2,7+31.`0)P1QR`P%#/P<9[[0A"(1
- XM$0#0(R@&..40"BK]'I&!@8&"?R?R?R<WXB?K..(H./*?*?*2D:&AH=@C*08X
- XMY1`**OX>&AH:&2GRGRGR@XXBCK/B<G-_)_)_)R@8&!@9T"(J"``"%1`2_AY^
- XM,H%2410R-",B(VBO2H8R(C)#(T$5)1CC)]`/*PQQRB`;'/X7WL+`..S2P.`.
- XM+`1QR`P$#/P#;_<1$2)(X`HN!''(#`0$_`-O]M`N+P@``A40*?X>`0\M/]+3
- XMTM/?+3WRT]\M/?+3TM/?+3WRT]\M/?+3TM/?+3WR`0"P#SH$<<@,!!+\$1(8
- XM$MXA@2&P%3L$<<@,!!K\$1(8$MXA@3XS'R$A(3#`$#T,<<H@&PS^#QW!W@R]
- XMX=P0P%)`#''*(!L=_ARGU2<M$K*QTAD=07'6%1A8%!8T%Q,6-A<2%B@T$A4X
- XM-!$6*34N13DU)BDU$14X-1$6*#02%C9$$Q8T$B,4&%1&'>'>'>+22"ELI[@,
- XM6P1QR`P'*?P>Q.V%PK@,701QR`P'*0`>PNV%Q.`08`1QR`P%#/T<"(B$0A"W
- XMWF#8#A((``(5!@?['/,T,T-24>`.$P@``A4&!_<<''/.<P@`Z`T4"``"%0H$
- XM^QG`V&/P,-@2%0@``A4,!_P<\:."$8$C0SAD0,@)%@@``A4.`?T8T>`/%PP`
- XM`A\(!_4=/$*!@8%"/-`0&`<<<Q(*!_O^,W2$='-C&"#0#2`$<<@,"03_#W)#
- XM0T)PX`]>"``"%0H%^QL,!((1`H!`V`E?!''(#`,$_!S`T!)]"``"%0P'^QPN
- XM(T,30R\E(B4CX`]^"``"%0X$_1L<!/PD/R`XX`Y_"``"%0P$_!Q@;P_P]@;`
- XM(@L)55@8&AT`')9%DU(2,G)E-%-D1$-T4EY3@XV8[2.#F$E`P!T,"..0%Q4=
- XM`!R6T#4J)RDV1S='."CD/1U7[2.#2$C`&0T(XY`7%1T`')FC4Y)D@V1^8X,]
- XM5^TC@TDIL"<.#558(R$=`!RF5L$V$C4J-T<I-U9'.$='.3@HY#D\+2?L,Y.#
- XM23DIL"0/#558(R$=`!RF6:-B$U.3962#=61SA(-^4Y.#/2?L,Y.#23DIX!PB
- XM"``"%0T,_QQ@9X>^/M#0@(0$("("$!$!$!$!`,@)+0555@X+`@`)V>`<7`@`
- XM`A4-#/H<"`B`B`B`A`1`0@(0$+"WQ]X>8("7L(``(5%`$`"]>X"7P0``,J
- XM*0$`"]WP#FED96YT:69I97(@0TU2\!5C;V1I;F=S8VAE;64@5&58('1E>'3P
- X5#&9O;G1F86-E8GET9?0`Z@``]?;V
- X`
- Xend
- END_OF_FILE
- if test 7517 -ne `wc -c <'utils/fonts/cmr10.pk.UU'`; then
- echo shar: \"'utils/fonts/cmr10.pk.UU'\" unpacked with wrong size!
- fi
- # end of 'utils/fonts/cmr10.pk.UU'
- fi
- echo shar: End of archive 12 \(of 19\).
- cp /dev/null ark12isdone
- MISSING=""
- for I in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ; do
- if test ! -f ark${I}isdone ; then
- MISSING="${MISSING} ${I}"
- fi
- done
- if test "${MISSING}" = "" ; then
- echo You have unpacked all 19 archives.
- echo "Read the README to get started with psroff installation"
- rm -f ark[1-9]isdone ark[1-9][0-9]isdone
- else
- echo You still must unpack the following archives:
- echo " " ${MISSING}
- fi
- exit 0
-
- exit 0 # Just in case...
-